Why TERRAZZO GraniTech

TERRAZZO GraniTech is a patented, non-cementitious, granite- and acrylic resin–based continuous surface system (often referred to as a microtopping) engineered for seamless, joint-free architectural finishes. TERRAZZO GraniTech is a complete system — not a single product — built around a compatible primer + finish + sealer stack designed to perform together. It’s a high-performance microcement alternative for interior and exterior applications — including walls, floors, ceilings, bathrooms, showers, wet areas, countertops, vanities, pool decks, and pool interiors.

Features strip 1 Features strip 1
Features strip 2 Features strip 2

Core Reasons Specifiers
Choose Terrazzo GraniTech

Crack-Resistant & Low-Maintenance for New Construction

Patented anti-crack memory resin technology supports a monolithic, crack-resistant finish that performs better than many cement-based plasters and microcement systems.

Hassle-Free Remodeling Without Demolition - No Permits Required

Apply over tile, drywall, cement board, concrete, and more (with proper prep) to reduce downtime, mess, and risk — boosting ROI.

Unmatched Versatility Across Interior & Exterior Surfaces

One system for walls, floors, ceilings, showers and wet areas, countertops/vanities, cabinetry, exteriors, pool decks, and pool interiors.

Before Before
After After

Full-body performance (not just a surface coating)

Unlike surface-dependent coatings, TERRAZZO GraniTech cures into a dense composite where mineral aggregates are locked into a resin matrix. Performance comes from the full thickness of the system, supporting even aging, strong wear resistance, and long-term aesthetics — more like engineered stone than a traditional coating.

Waterproof-ready for bathrooms, showers, and wet areas

TERRAZZO GraniTech is inherently waterproof prior to sealing, and when installed as a complete system it’s ideal for bathroom walls, showers, and other wet-area applications. Sealers are used to dial in sheen and improve cleanability and stain/chemical/traffic protection depending on the environment.

Expanded finishes for complete design packages

We also offer Monolith (resin-stone), Micromosaic, and Gaia — a brush-applied finish that delivers a limewash-like look with fewer limitations than traditional limewash. View real installations in our gallery and before-and-after projects.

Die nächste Generation der Putzlösungen

Strong, Stylish & Versatile

Bei Terrazzo GraniTech USA haben wir uns verpflichtet, die Grenzen der Innovation zu erweitern. Seit unsere Reise 2009 mit Mikrozementanwendungen begann, führte unsere unermüdliche Forschung und Entwicklung 2018 zur revolutionären Einführung von TERRAZZO GraniTech Putz / Microtopping. Dieses vielseitige Material wurde entwickelt, um die Grenzen von traditionellem Mikrozement und anderen zementbasierten Putzen zu überwinden und einen neuen Standard in der Branche zu setzen.

Galerie
Anwendungsdienste
  • The material returns to it’s original form after being subjected to pressure.
  • Does not present cracks.
  • Stain resistant against water, coffee and oil, even without varnish.
  • Easy to apply. No special training required.
  • Great workability.
  • Repairable.
  • Does not develop connection marks
  • Does not leave black marks.
  • Ready to use.
  • Can be stored without losing effectiveness for up to 12 months after opening when sealed with cap.

Nach Oberflächenausführung einkaufen

Shop
by
Oberfläche

Medium

Fine

Mikroterrazzo

Gaia

Monolith

Texturen

Reviews by Customers and Professionals

“This is definitely a product that allows you to deliver premium results with confidence.”
Oscar DiazProfessional Microcement Applicator
“This is the kind of system you trust for serious, high-end projects.”
Arman AbianSatisfied customer
“The attention to detail and quality of work exceeded expectations.”
Dimitrios KentisSatisfied customer
“I appreciate their customer service and I will definitely be using their products for future projects.”
Samantha MorrisTile & Stone Contractor
“The finish looks incredibly high-end and seamless — exactly the kind of modern aesthetic we were aiming for.”
Aristeidis TentesSatisfied customer
“Overall, this was easy and we did not need to worry about what could go wrong because we knew we had good support.”
Joshua KasperSatisfied customer
“This course was not a sales presentation — it was genuine, practical education delivered by professionals.”
ConstantineConstruction Tradesman / Contractor
“These guys are the real deal — not the cheap microcement you see everywhere.”
Aiman AmraContractor / Trade Professional
“Outstanding company to work with.”
Marcin WykaSatisfied customer

Best seller products

Terrazzo Granitech Medium resin microtopping on hotel bathroom and room walls, floor, and ceiling.
Hot
Ausführung wählen Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden

Terrazzo Granitech Medium

Preisspanne: $30.85 bis $194.51
Terrazzo Granitech resin microtopping with Armourcoat satin PU sealer on kitchen ceiling and walls.
Hot
Ausführung wählen Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden

TERRAZZO GraniTech Armourcoat Satin PU Sealer

Preisspanne: $97.80 bis $694.19
Terrazzo Granitech resin microtopping on bathroom wall in taupe finish with marble sink.
Hot
Terrazzo Granitech resin microtopping with Armourcoat satin PU sealer on kitchen ceiling and walls.
Ausführung wählen Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden

TERRAZZO GraniTech Eco Grip Quartz Primer

Preisspanne: $33.94 bis $187.80
Terrazzo Granitech Hydro Stop epoxy primer applied under resin microtopping on hotel surfaces.
Hot
Terrazzo Granitech resin microtopping with anti-slip matte PU sealer on hotel bedroom walls in mint green finish.
Ausführung wählen Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden

TERRAZZO GraniTech Hydro Stop Grip Epoxy Primer

Preisspanne: $312.45 bis $624.90

    With you every step of the way

    Dedicated professional support across the full project lifecycle

    Schedule consultation

    Frequently Asked Questions

    Yes. It delivers a similar seamless aesthetic, with a granite-aggregate + resin matrix designed for durable continuous surfaces. It is also more flexible than many cement-based microcement systems and inherently waterproof prior to sealers.

    Yes — TERRAZZO GraniTech is inherently waterproof prior to sealing. Sealers are typically applied to tune the finish and add stain, chemical, and traffic protection for the specific use case.

    No. It’s a waterproof decorative finish, but it’s not a primary waterproofing/tanking membrane. Where code or exposure requires a flood-tested assembly, a code-compliant waterproofing membrane must be installed in the substrate first, and TERRAZZO GraniTech is applied on top as the finished surface.

    Yes — in showers, wet rooms, continuously wet areas, exterior areas, and slabs on grade, waterproofing (and/or vapor management) should be addressed at the substrate level per code and exposure. Terrazzo GraniTech then becomes the finished seamless surface.

    Yes — when installed as a complete system with proper prep and the appropriate sealer build, it’s used for shower walls, bathrooms, and wet areas.

    In many cases, yes. It can be installed over existing tile (and other stable substrates) with the correct prep, adhesion system, and detailing — reducing demolition and speeding remodel timelines.

    Almost any smooth and stable surface! Most common substrates include concrete, cement board, drywall (in dry areas, at least level 4), and existing tile (with proper prep). For specialty substrates, a test panel and the correct build are recommended.
    No. Metal must be properly cladded first (e.g., cement board / appropriate substrate assembly). Then the system is applied over that substrate.
    Yes. TERRAZZO GraniTech is UV resistant and suitable for exterior exposure when specified with the correct system build for the environment.
    Typical total thickness is about 3–4 mm (~1/8″) depending on the finish and build. (Fine/Medium are thinner per coat; Microterrazzo builds thicker due to aggregates)
    Avoid imminent rain, high wind, direct sun, and extreme temps. Don’t apply below roughly 54°F / 12°C or above 89°F / 32°C, and avoid very high humidity. (Installers should follow the latest system instructions for the exact window)

    Yes — TERRAZZO GraniTech is low-VOC and low odor when used per spec. For compliance language, reference the current SDS/TDS for the exact values and statements.

    We sell the system, and projects can be completed by trained/certified installers in our network (where available). This helps ensure the substrate prep, detailing, and sealer build are executed correctly.

    TERRAZZO GraniTech is designed to be more color-stable and predictable than many cement-based microcement systems, which can shift as moisture evaporates and hydration occurs. Final appearance can still be influenced by substrate uniformity, mixing consistency, application technique, drying conditions, and sealer selection. For critical color matching, we recommend a small test panel using the full system build and the intended sealer sheen.

    No. TERRAZZO GraniTech is supplied as a premixed, ready-to-use paste in a bucket (untinted) — not separate bags and resins requiring complex batching. To prepare it, you add pigment and a measured amount of water (typically about 6.8 oz, per your system spec), then mix thoroughly according to the latest instructions.

    No. TERRAZZO GraniTech is a trowel-applied decorative plaster / continuous surface finish, not a self-leveling underlayment. It will follow the substrate, so the surface must be properly flattened/leveled and prepped first (as needed) using appropriate patch/leveling materials for the substrate and application. TERRAZZO GraniTech is used to create the final seamless architectural finish, not to correct waves, dips, or out-of-level floors. Do not apply thicker than the recommended system build — overbuilding can interfere with proper curing and performance.

    No. TERRAZZO GraniTech offers a variety of finishes and each is a complete continuous surface system, designed to be installed as a compatible primer + finish + sealer build. Using the full system helps ensure proper adhesion, durability, cleanability, and long-term performance.
    TERRAZZO GraniTech is designed to be more flexible and crack-resistant than cement-based systems, but no decorative finish can eliminate cracking if the substrate moves, has existing cracks that weren’t properly treated, is out of plane, vapor barriers are not established properly, is not installed properly, cure times are not respected, or overall is not prepared to the required standard. For best results, follow the specified substrate prep, reinforcement/mesh where required, and the full primer–finish–sealer system build.

    With correct substrate preparation, proper installation, and appropriate maintenance with resealing as required, TERRAZZO GraniTech is designed for long-term durability. Lifespan depends heavily on traffic level, exposure (wet areas/exteriors), cleaning chemistry, and the sealer system used. In many residential and light-commercial environments, the finish can perform for many years, with periodic resealing as part of normal lifecycle maintenance — similar to other premium continuous surface and architectural finish systems.

    We do not offer an installation warranty because performance is application- and substrate-dependent, and we are not on-site to control preparation or installation. Workmanship warranties are provided by the installer (and many states require at least a one-year workmanship warranty under local contractor rules). Our responsibility is limited to the material itself: if a defect is identified at the time of opening (before application), we will replace/refund the defective product up to the purchase price. We can provide lab/test certificates upon request where available.

    For routine cleaning, use a pH-neutral cleaner and a microfiber mop. Always dry dust first (microfiber dust mop/vacuum with soft head) to remove grit — grit is the main cause of dulling and micro-scratches. Avoid abrasive pads/powders and absolutely avoid “no-rinse” cleaners, which leave residue that gradually degrades PU sealers. If a stronger chemical is ever used (e.g., heavy degreaser, bleach etc), it must be immediately thoroughly rinsed off with clean water afterward and not left to dwell on the surface.

    We generally do not recommend steam mops on PU-sealed continuous surfaces. Heat and moisture can accelerate sealer wear and may cause hazing/whitening in micro-scratches over time. If a steam mop is used, wait until the system is fully cured, use the lowest setting, keep it moving (no dwell), and avoid frequent steam cleaning as routine maintenance.

    Pro tips: use entry mats in sandy areas, add felt pads under furniture, and wipe spills promptly for best long-term appearance.

    For microtopping floors and microcement-style continuous surfaces, we typically recommend 1 coat of Armourcoat Satin Sealer plus 1 coat of Matte Sealer as our standard-duty system. For floors, this is the minimum we recommend. For higher-demand applications, our max-duty option is 2 coats of Satin plus 1 coat of Matte. For walls, the right system depends on the desired look and level of use. For a satin finish, 1 coat of Satin is our light-duty option, while 2 coats are recommended. For a matte finish, Matte can be used, but Matte only creates a weaker sealer system. In most cases, we recommend starting with 1 coat of Satin and then adding either a second coat of Satin or a Matte topcoat, depending on the desired finish. If the walls are in dry areas outside bathrooms, we would typically recommend our wall sealers instead.
    Yes — and this is true for any premium floor finish. Just like you would with hardwood or polished concrete, we recommend felt pads on all furniture legs to avoid point loads. It’s a simple step that keeps your surface looking flawless for years.
    When installed properly our microtopping materials hold up for the long term thanks to their formulation that allows them to cure into a dense architectural surface. Any dark spots, bubbles o rblistering are usually expressions of one condition: moisture or water vapor trapped beneath the finish — not a defect in the material. Concrete transmits water vapor continuously, particularly slabs on grade, below-grade slabs, lightweight concrete and gypcrete, and slabs over unconditioned space. Bare concrete releases that vapor freely; a finished surface does not. When vapor reaches the underside of a continuous surface system and cannot escape, pressure builds against the bond line and can present as dark irregular patches, blisters or bubbles, efflorescence (white mineral salts), or delamination. This applies to every topical system in the category — microtopping, microcement, epoxy, resin, and tile alike.

    Often, yes. Issues appearing within hours to days generally relate to application and site conditions during installation. Factors such as temperature during application, cure times between coats and other factors are important. However, issues appearing months later more commonly relate to substrate conditions — batch, ratio, and cure defects declare themselves early rather than after a period of normal service. Seasonal timing can also be informative, as slabs frequently transmit more vapor in humid months than in dry or heating season. Sudden, localized damage may indicate a discrete water source such as a plumbing leak or failed sealant. Determining the actual cause on any given project is a matter for the installing contractor or a qualified professional with access to the site.

    No. TERRAZZO GraniTech is an inherently waterproof decorative surface prior to sealing, meaning it resists water from the surface — which is why it performs in showers, wet rooms, pool surrounds, and exterior exposure. It is a decorative surface, NOT a vapor barrier and does not resist hydrostatic pressure or vapor drive from beneath the substrate. No topical decorative finish does, including microcement, epoxy, polished concrete, and tile. Vapor drive is a substrate condition and the remedy is installed below the finish, never within it. Decorative finishes rely on the preparation being performed properly and any decorative finish is only as good as the substrate beneath it.

    Yes. Substrate moisture and vapor conditions must be evaluated before any primer or finish is applied, and results must fall within the limits published in the current spec sheet.
    Selecting appropriate test methods, interpreting results, and determining whether vapor mitigation is required are professional judgments that depend on the specific slab, building, climate, and application. Recognized industry standards exist for this purpose. These evaluations should be performed by the installing contractor or another qualified professional with direct access to the site and knowledge of the conditions. We do not specify testing procedures and do not evaluate substrates remotely, any advice we may provide should be confirmed by the installing professional or other contractor.

    TERRAZZO GraniTech is a material supplier, not an installation company. Substrate assessment, moisture and vapor evaluation, mitigation, and preparation are the responsibility of the installing contractor, as stated in our published application instructions and spec sheet. We supply the system and provide product-related technical support; we are not on site and do not control preparation, installation, or site conditions. Workmanship warranties are provided by the installer – installers are responsible of approving existing substrate conditions and installation conditions, curing times and any other installation related factor that is important for a successful outcome.

    TERRAZZO GraniTech can be repaired in place without refinishing the whole surface. Because the finish carries natural movement, a repair blends into the surrounding area — the more movement, the less visible the repair. On very uniform finishes, re-coat to a natural break: wall to wall, or corner to corner

    Stay in the know

    Abonnieren